CONCRETE PAVER
1-3-5
SEALING PROGRAM

(see also Travertine Paver Sealing)

Why Seal? Sealing is the only way to stop surface loss of color and texture of your concrete pavers.

When to Seal? Seal upon project completion (year 1), again at year 3 and once more at year 5.

The Benefits. This program assures your pavers will have the correct amount of sealer. Sealing after this schedule should be on an “as needed” basis. The KEY is not to over-seal which creates a vapor barrier therefore causing discoloration.

How Sealer Works. Sealer acts as glue and penetrates the top 3/16” of the paver bonding all the particles of sand and oxide (color) together. Sealer penetrates these tiny pores within the paver and remains even when the initial sheen wears off.

If You Don’t Seal. Pavers abrade due to rainfall. You will begin to see the white aggregate that makes up the paver mix design. This makes the pavers appear faded.

The Process. We will pressure clean your pavers removing as much dirt and grime as possible. The pavers are left to dry. We then apply two coats of sealer. Foot traffic is allowed after a few hours and vehicle traffic after twelve hours.

Our Commitment As a courtesy to our clients we would like to offer you our 1-3-5 services. We will provide automatic reminders to you at the 1-3-5 year intervals.

Why Booths? We know your project. We are the only company that offers and provides you comprehensive maintenance services. We are committed to servicing your project like no other!

Call Today To Sign Up!
407-521-2823 or email us at sales@boothscobblestones.com